Chosen Solution this nspire model differs from both the standard CX and the grey school edition with yellow highlights. I see 4 screws to remove, but am still unable to disassemble. Screen flashes white briefly when USB cable is plugged into power source, but does not boot or power on beyond the flash. Update (04/16/2019) All visible screws have been removed. Are you sure you should be taking apart school property?...
Chosen Solution The USB connector has become a little loose not allowing a good enough connection for charging. I have stripped it down and closed up the socket but fear it will become loose again very soon. Any ideas where I can get a replacement? I suggest buying a cheap used/broken one with working motherboard and salvaging the motherboard out of it
Chosen Solution I got AirPods from Christmas which were bought from Walmart. Both headphones are quiet but the right was is very low. Apples website doesn’t recognize the purchase date as it wasn’t bought directly from them. I tried blowing, resetting and gently cleaning them but nothing has worked
Chosen Solution I have been using a Plilips docking station for the past two years,mainly to listen to radio, with no problems. The phone is suddenly displaying ‘This accessory is not supported by iphone’ and will not charge or work with the dock. Is there a fix for the problem?. you could try cleaning both the charging port on the iphone and the port on the dock, if that doesnt work, most likely the charging port on the iphone needs replacing
Chosen Solution At the link to buy a dock replacement Nintendo Switch Dock , does the product come included with a controller board for charging the Switch console, USB charging ports and etc. ? The switch dock has: 1x usb-c input (mainly used for charging input) 1x hdmi output 1x USB 3.0 or 3.1 input 2x USB 2.0 input
Chosen Solution I replaced the Logic Board AND SSD of my Mid2015 Retina MBP. I’ve got a board from iFixit and used an Aura N SSD which is supported from Sierra on (El Capitan did not recognize the internal SSD but I was able to install to an external USB Drive) I managed to install Sierra. Upgrading from Sierra to High Sierra fails after a reboot with the “macOS could not be installed on your computer....
Chosen Solution My Macbook fell from the table but I was able to turn it on and nothing seems damaged. A few days went by, I put my laptop to sleep and when I open it, I see the flashing folder with question mark. I was able to restart the laptop and it worked like normal except that this happens every now and then, maybe more often when I throw it on my bed....
Chosen Solution Good day ,I have a Hotpoint Quadrio about 8 year old ,worked fine but now fridge is only staying at 13c , i’ve checked the fan in the freezer and all working ok ,freezer still working but the cold air doesn’t seem to be circulated back up to fridge enough ,I can feel the cold air circulating in freezer no problem but very faintly into fridge ,also checked for obstructions but nothing ?...
Chosen Solution Hi, I can’t seem to configure the Time & Date on my iPhone 5C. My SIM is working fine and I get full signal, although when I choose to set time automatically it just hangs on setting the Time Zone. I just get the loading animation next to Time Zone and it never seems to load. Hi Donald, It may be that it’s having trouble with location services. You can try to toggle some settings off and on to see if it will clear it....
Chosen Solution https://ibb.co/rbTXjCn https://ibb.co/yNt75LZ https://ibb.co/xmr3GSf I inserted a wrong misfit sim card tray into my Thinkpad T440. The tray engaged into interlocked i could not pull out. After I pull out with a certain amount of force, I pulled out the sim card tray and along the above gold metals. I feel really stupid. Can this be repaired? Hi, The SIM card reader is mounted on the systemboard. To gain access to the SIM reader you’ll need to remove the systemboard....
Chosen Solution I have a 2011 17" with a broken GPU just gathering dust, it boot loops since the GPU is dead(or something similar, not sure about that). IMO the quality of the chassis is still above most windows Laptops and is definitely worth saving, so I decided to try to install Chrome OS Flex, I tough it could do with just the iGPU and if it never turns on the dGPU it would work fine....
Chosen Solution i want to check which wifi card is in there to change it to better one Hi, Device Manager should tell you which WLAN (WiFi) card is installed. To get to Device Manager in Win 10, press the Win key + the x key (both together) and click on the Device Manager link . When in Device Manager scroll down to Network Adapters, click on the > symbol to the left of the category to expand the list, to view the make and model names of the installed adapters....
Chosen Solution The charging port on my JBL Pulse 2 is a micro-usb. I went to unplug it a few days ago, but the included cable’s male end came out of the cord itself and was stuck in the pulse. I just took a pair of tweezers and shimmied it out. I replaced the cord. Now when I go to charge it, sometimes it charges, sometimes not, and when it does I have to angle the charger up or down....
Chosen Solution I crakced my macbook pro’s bottom bezel, first day display was fine.. now a black strip appear..when tap on that cracked portion. That area color is reverting the color of actual screen.. So costly to replace entire screen.. please help.. Update (01/12/2019) Is it possible to change chin plate? When clicking there color is inverting with black color when tap on that cracked portion. That area color is reverting the color of actual screen....
Chosen Solution Got the device about 2 Christmas’ ago. It will not make any noise, not even the starting up or shutting down booping noises, just a little static blip. The people at UE Boom were of no help. I have factory reset the device, confirmed that the program is up to date by plugging it into my computer, removed the device from my phone and reconnected. Nothing seems to get this thing to make noise again....
Chosen Solution Hi ! I have an Archos 35 home connect - but question is for any device My device has a 3.7V, 750 mAh, 2.77 Wh Li-ion battery, but it has inflated, it’s dead, and the manufacturer doesn’t make them anymore (Coslight CA403064) :( The fact is that the device is plugged permanently, which must explain the inflation (too bad, looks like they don’t put a security cutoff system !...
Chosen Solution Hi there. I was cleaning out my early MacBook pro 2011 i7 2.2 and decided to use Omni Disksweeeper. I read that many were successful using the software with the terminal command: sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper. I used the youtube video: https://www.youtube.com/watch?v=aBiXCNRd… for reference. After putting in the command I got a strange message: OCCCrashCatcher: Not enabling crash catching since we’re connected to a tty (and thus presumably in gdb) ....
Chosen Solution I’ve had this car for years with little trouble. It’s the last year before I replace her, but she’s stopped starting in cold weather only a few months before I have the money for a new car. I can get her started by pointing a fan heater at the engine block for five-ten min, but it’s not ideal. The engine turns over very well. But could the cold be zapping some of the battery power preventing the warming of the engine?...
Chosen Solution Short story: I took my MacBook Pro to an Apple authorized service center to replace my display for stain-gate program. They told me my system had liquid spills but they can replace the display it at my own risk, I then accepted. Now they give me my laptop with new screen but the screen is black. Its’ working with external monitor through HDMI.Apple logo doesn’t light upI’ve already tried reboot methods holding keys but didn’t worked for me....
Chosen Solution I have recently swindled into buying a Subaru Outback and the man said that he had done all these relairs on the car. I bought the car but the repair receipt was forged. I am now trying to piece this car together but I keep getting told I have to use Subaru parts from the factory. Do all the parts need to come from the factory or can I use offbrand valve cover gaskets and fuel pumps?...
