Chosen Solution I dropped my phone and the screen went black i could still tell it was on. So i tried to power it off to see if it would come back but it wouldn’t respond so i held the home and lock button and after that it shut off and never turned back on. i noticed it got really hot as well. That would be Either a bad motherboard. Or a dislodged screen connector....
Chosen Solution while turned off, my ps4 turned on by itself and ejected the disc. I haven’t had power since. No longer turns on or takes a disk. The eject button beeps, but the power doesn’t and there’s no light at all. I’ve seen no one with this problem. HELP! Try this fix Here. Mine would auto eject and shut down, or power on by itself and eject. I did this fix and honestly it fixed my console....
Chosen Solution Hi, I replaced the internal ssd memory, I reassembled the pc. But when I plug in the power cord and press the button, the pc won’t turn on. the pc seems dead. What can it be? Thanks Hi @riky_c78 , You will have to open it up again and check that all the cables have been reconnected properly and that none were disturbed when you did the replacement. Here’s the ifixit Asus Zen AiO Pro Z240IC Repair guides that may help....
Chosen Solution I dropped my phone from very long height , screen and glass looking good but no power on. may I know what could be the problem ? Best guess is something came loose on the inside and is now not operational, you could try to open it up and just get a visual on anything that might be out of place or disconnected, try re-seating everything, if that doesn’t help the it will more than likely be the board...
Chosen Solution Hey, so I have a remote that I think is from an early batch, I have heard of a few other people with similar problems from over a year ago. The remote looks new but I think I have been tricked into buying a second hand lemon as these issues were happening from almost day one and I noticed the box seal was broke when opening it. Unfortunately I can’t get a refund or replacement....
Chosen Solution Hi. I broke my screen and tried to repair it myself. Unfortanetly I managed to torn the touch id cable in two. I could use it for a while but after upgrading the phone I get this error 53. Is there someway to fix this and is it possible to fix the cable perhaps? It is possible, however this is neurosurgery level handcraft. yes, send your phone to apple, cost you 119€ for a new home button with touch id....
Chosen Solution No power to panel. Got continuity through noise suppressor. Got board out. nothing looks like a fuse. Run through this video and see if it helps locate your issue. I got nothing with that model number. https://www.youtube.com/watch?v=XevL17ty… cliff.witt looks like the only fuse is on the inverter just below connector CN5 Let’s hope this will help you to get started
Chosen Solution Bought new battery put cart won’t start now. What can the problem be? Disconnected fuel pump/clogged fuel line? Bad wiring? No distributor belt? Seized engine? Blown fuse? Neutral safety switch? Discharged Flux capacitor? If it’s there, try turning the key to “Start”, or pressing any buttons next to the ignition. Good luck!
Chosen Solution Great, thank You first. A gexl44 oven. The control board wb27t10083 does not respond to the bake or up/down arrows. No error codes. Unplugged 5 wire plug in contact on the back of the control board, cleaned and no change. Feels like the three buttons bake, arrow up and arrow down have just been over pushed in operation. Unsure if the contact to the responding part of the button is happening....
Chosen Solution I have an iPhone 6 running iOS 10 and the homebutton is broken. It was reset and now it cant be set up because of the “press home to open” crap. I was using Assistive touch before it was reset and by default it is disabled so how do I set up the phone? I would buy the home button for that device and check out the guide that fixit has and it is pretty self explanatory....
Chosen Solution My son has this gaming wheel (thrustmaster 458 ) and it seems the wheel sensor has gone faulty , can you buy replacement repair parts from anywhere ?? If you post a photo and give us any numbers it has on it we may be able to help. I find no listing for anyone selling part outside of Trustmaster. They may sell you the part. They contacting them here: https://support....
Chosen Solution a few years ago i had water damage in my keyboard and replaced the keyboard. it worked fine up until the moment it didnt. at the moment i have a couple more internal keyboards as replacements that i thought would fix the issue but it seems like the issue is really the motherboard. //** QUESTION. is there a way, upon pluging an old keyboard or wireless that i can override this “fault connection” between the keyboard and the motherboard?...
Chosen Solution Hey, is it possible to replace the wifi card with one that supports wifi 6 or 6e? No, because there is no wifi card, the chip is soldered on the board directly. Get a USB one if you want to upgrade wifi.
Chosen Solution There is a lot of discussion all over the web about it, but i couldn’t find a solution yet. When i try to erase or format a brand new ATA 1.8" 80GB drive (Samsung HS082HB/A) using disk utility i get this error message “POSIX reports: The operation couldn’t be completed. Cannot allocate memory” Under 10.5 it’s similar, it only says i/o error instead. The disk seems to be named nearly randomly, things like SAISQNC or else and sometimes it shows a capaticy above 2 PB....
Chosen Solution Changed the battery in 11" Mac book air, however new battery will only charge to 22% then when unplugged from mains it jumped to 73%. Appreciate any advice. Follow the guidance at this link to calibrate your new battery: https://www.lifewire.com/calibrate-macbo…
Chosen Solution Hey, I was trying to fix my oldie half alive iphone 4(it is locked with the passcode which I don’t remember, been a long time haha) , changing some parts from broken-screen iphone 4s. Is it okay to do it ? Is it possible to change something(i don’t know which part it might be) where the information about this phone is held(passcode etc.) Thanks for answering! You can change the LCD assembly....
Chosen Solution When you take out the cup that contains the blades you’ll see a plastic circle with a nut in the center to hold it to the motor. That plastic broke & I have bought a replacement but can’t get the old nut off the motor. Suggestions?!?! @texjohn , John , Below are video links to show how to remove/replace the plastic drive gear. Caution the gear is threaded opposite to normal threads clock wise to remove/counter clockwise to tighten....
Chosen Solution Hello, I run the program on 51, the data has no problem. However, when I change the program and run it on atmega128. The HMC5883 compass outputs wrong data, which has no application value. But the acceleration and output data of gyroscope has no problem. The x, y, z can arrive at 5530 the top which seems to be beyond the scope. Another question is: void conversion(unsigned int temp_data) { wan=temp_data/10000+0x30 ; temp_data=temp_data%10000; //complementation qian=temp_data/1000+0x30 ; temp_data=temp_data%1000; //complementation bai=temp_data/100+0x30 ; temp_data=temp_data%100; //complementation shi=temp_data/10+0x30 ; temp_data=temp_data%10; //complementation ge=temp_data+0x30; } Why I should add 0 x30 to get the values?...
Chosen Solution Hi all, Yesterday I opened my coffee machine to give it a good clean. This is not the first time I’m doing this, but this time I forgot to remove the power plug. After removing some wires there was a short. I immediately removed the power plug. After some time I tried to turn on the machine, but nothing on the screen. I also hear nothing working like the gears etc....
Chosen Solution I was on a call on this phone & suddenly the phone just died. If I hold the power button the google logo appears but as soon as I let go of the power button the phone dies; just want to get an idea of what the problem may be? dead battery or charging port? When plug the phone into a charger, nothing happens…it as if it isn’t charging but not sure what else to test before i start replacing things?...
