Chosen Solution Whenever I connect the controller to a USB or charging station it flashes orange 3 times then does nothing, I’ve reset it and cleaned the inside, nothing’s worked You could try replacing the charge port or if it’s not that then it’s your motherboard
Chosen Solution Speaker in my JBL flip 3 is crackling and popping like !&&*. Its practically new so I’m super bummed. Any fix I can try? You can always unpair and repair it with your device. Does the crackle happen with every device? Have you tried pairing it with another phone? If it’s new,and unpairing doesn’t fix it,you should return it under warranty if it still has one. Also,many manufacturers give a one year warranty....
Chosen Solution I just replaced the screen on my iPhone 5s with a replacement screen from iFixit after the digitizer on my old screen went out. After turning it on, I find that I have a thin dead spot on the screen, right over where the bottom row of keys are on the keyboard (abc, emojis, speaker, space, return keys). It makes it impossible to click the “iMessage” blank in text messages to be able to type a message, not to mention I now have to space by clicking on the predictive text....
Chosen Solution Whenever I try to play a game (any game) I get CE-34878-0. I know that deleting and reinstalling the system software and the game is supposed to fix this issue, but in my case it does not. I suspect there is a hardware problem, but not sure how to go about identifying it. If I could verify the component causing the problem, I could decide if I should try to fix it myself or send it to Sony....
Chosen Solution I recently bought an iPod Touch 2nd gen with a cracked digitizer. I have replaced many of these in the past, and have done many other numerous iPod repairs on all other iPod models. So I took off the broken digitizer, and put it the new one. I did not secure it to the iPod Touch, just in case it wouldn’t work. I then powered it on to test it....
Chosen Solution Macbook pro a1425 2 days on charge now the machine dead no fan spin just got green light dimming. Pp3v42_g3h is stable at 3,38v But Ppbus_g3h pumping up and down from 3,9 to 14,65v Check capacitor and resistor around u7000 No short but found R7016 pin 2 value 1625 on resistance mode R7001 got 5.4v stable R7025 pumping from 5 to 19v up and down R70110 & R7011 pumping from 2,6 to 3,2 v Is my U7000 need to replace?...
Chosen Solution I have a powered Rockford Fosgate 12” P-300-12. It blows both 10A fuses quick. I’m looking for information and or repair advice for the amp. I had same ussue abd it was my ground cable. Unfortunately for myself, it fried the tinsel wire on the speaker
Chosen Solution I droped my phone today and need some help fixing the screen since it shattered. Any help is greatly apreciated. I found this video guide here and I found a replacement kit here. The only thing that isn’t included in the kit is the heat gun or any precut adhesive for the rear panel. However, I’m willing to bet that you could probably get away with using an iOpener, and this adhesive for the rear panel....
Chosen Solution the dvd drive on my clamshell ibook would not open. I used a paperclip to release it, but now the drive will not click and stay shut. the drive works, will play store bought dvds. Can this be repaired or does the drive need to be replaced Thanks David The opening mechanism may have stuck when you placed the paper clip in it forcing it to stay open. Try using the clip several times to see if you can get it to release....
Chosen Solution My headphones broke off into the port of the ipad and I do not have a clue on how to get it out. I have tried tweezers but I can’t grip it. Any ideas? It all depends on where it broke off. Unfortunately plugs like this both are pretty smooth, and are gripped tightly by the ipad. If there’s still a small part protruding from the ipad, there are a few tricks you can try, but the only sure fire way is to open up the ipad and try to remove from the back of the port (which in itself isn’t that easy, since in all likelihood it’s a closed component) First of all, if a small piece still sticks out: I’ve had some successes in the past with a simple bit of string (preferably a very thin, slightly rough yet strong cotton like used in sowing)....
Chosen Solution Printer has suddenly shown error code 1681. Says more than one cartridge of same colour installed but this is not correct suhill2 first you want to check the ink tanks to ensure that the appropriate colors are installed in the correct positions. It is always possible that the (a) new cartridge is defective. Replace the last installed cartridge and see if that does not resolve it.
Chosen Solution One of the lens components inside the eyepiece is out of place after a bump. Can it be fixed or must the eyepiece be replaced? Please see @flyingdutchman ’s answer to this question: How to get access to fix the optical view finder lens? You will have access to your viewfinder, and will be able to assess whether it needs replacing or just popping a lens back in.
Chosen Solution After replacing my iPhone 4s screen, everything seems to be working, from wifi to phone calls, except the screen displays rapidly flashing colors and lines and moves around quite a bit. I was very careful with the digitizer and other logic board connectors and made sure they were firmly in place and undamaged. Should I go back and try to reseat them or is theres something else I can do?...
Chosen Solution I just got my tablet,and as I was going thru it,I set a dotted pattern to lock,unlock,since I just got it like I said before;the battery is just charging, I set the tablet to rest and charge while I went to eat ,thinking I would remember the pattern to unlock it,well I did not, I thougth that resetting the tablet by depressing the little hole that says ‘reset’ will help but no,it did not help at all....
Chosen Solution My gson drove my 03 sunfire says he put 3 gallon of gas in her went in the house came back to a gas leak lotsa gas under the re ar of the car You need to get your car towed to a mechanic to get it repaired before driving it again. The gas leak is a serious safety hazard.
Chosen Solution Hey i have dell m6600 laptop it suddenly turned off and turning on its battery is dead. When i connect to the charger it gives 4 orange light blink but when i press power on button the light went off and won’t turn on. Your laptop is 11 years old so it is likely that the battery is dead but read on. Here is the user manual for the Dell Precision M6600 laptop: https://dl....
Chosen Solution When i plug my phone I. It’s loose I have to wiggle it stay in Port how can I fix it First I would try a new charge cable, overtime the pins that hold the charge cable into the phone can stop functioning. If that’s not the issue you will need to have the part replaced at a professional repair shop (because this Port is soldered to the mainboard)....
Chosen Solution How to clean/replace scanning roller in Auto document feeder in cannon image class 4350 printer.( Streaks appear in copies while using Auto document feeder) This is a super easy fix. i had this problem and all it took was a microfiber cloth to remedy it. just whipe the scanning surface at the left edge of the scanner with the cloth be sure to get under the plastic feeder too because when you scan with the ADF (auto doc feeder) that small space is the only optical point of contact with the document and if there is dust than big black streaks...
Chosen Solution I went into Starbucks and they gave me a packet called URNEX, Urn and Brewer cleaner. Is this a good one to use for this machine? Update Thank you so much, glad I didn’t use that. I found one at a store called Durgol. They recommended highly. I haven’t tried it yet. Is this okay to use? http://www.wholelattelove.com/Durgol/dur… That product is designed to clean drip coffee makers and carafes; to descale the inside of the Barista boiler you need a citric acid based product such as Dezcal (also made by Urnex)....
Chosen Solution i bought a new drive for my ps4 and ensured that it would work with the board on my current drive after replacing it the drive wont accept discs or even read ones already inserted. the original issue was the motor wasnt working. the board that arrived on the new drive was a bdp25 and mine was a bdp20. teh motors also look like a different number if tat means anything....
