Chosen Solution Hey group? I have a problem. My gear 2 neo display where the arm band connects to the face of the watch is broken. I need to get this part fix in order to connect the arm band to the watch. Can you help me out with this problem? Does anyone know how to repair or do I need to change the face of the watch? I have the same problem too....
Chosen Solution Two buildings 20 yards apart. Two radios with docking stations work fine in bldg. A, neither one works in bldg. B. Both buildings have outdoor antenna with same view of the sky. LCD display shows station, artist and song title but no audio. Radio in bldg. B worked for about 5 years then quit. Replaced antenna and wiring in bldg. B still not working. Turns out the problem is with the power unit....
Chosen Solution My dryer stopped heating, everything else was working fine. I replaced the heat element, thermal fuse, etc. Now, it will come on and click like it’s going to start but it doesn’t. What could it be? If it was working fine before, go back over your work and recheck everything you did. Use a multimeter to check for continuity.
Chosen Solution As title states it. Problem that a lot of people have yet its different. My controller is brand new (well it was not used but prob sitted in shop for a long time, bough it as damaged). It does charge but only with EXT port, not usb. The light is working. Known solutions, that did not work. Its charging cable. - checked Its charging PCB - swapped to working one, no resoult Its chargign PCB ribbon cable - swapped, no resoult Its connector on main PCB to charging PCB - well the light is working so doub it, but still can actually be it....
Chosen Solution I havent posted in a year or so because i left the industry, but I’ve fixed 1000’s of iphones. My wife’s ear speaker is very low and shrill. So I opened it up, and replaced speaker. I also made sure mesh was clean. Still the same. Then I took the new speaker and tried it in a different LCD assembly, but on the same phone, and it worked fine....
Chosen Solution Hi! After Lcd replacement, ear spaker not work. I changed the speaker, but don’t work. Than i changed the flex cable, than don’t work. What should i do? on the speaker there is metal pins, you need to make sure they are touching the metal contacts on the flex, also make sure it is plugged into the connector correctly
Chosen Solution Hello everyone, I have a problem With an iPhone 5C. The Facetime camera does not work on any app (Photo, Facetime, Snapchat…) I’ve change it and it still doesn’t work with a ne piece (I’ve tried 5 different flexes) I tried to reset the settings, reset the devices and it still doesn’t work. Do anyone had this problem ? Thank you ! iPhone 5c Front-Facing Camera and Sensor Cable Replacement Use this guide to check your sensor cables and for help if they need to be replaced....
Chosen Solution Hi, I have a mid 2012 15 inch Retina Macbook Pro that was running absolutely fine till last 2 years. Just recently it is creating problem like the fans of the laptop run constantly even under normal cpu load and temperature. I have tried every possible guide and way to fix it but just couldn’t solve it. Then I ran the hardware test and found out the following error: 4SNS / 1 / 40000000 : Th2H - 127....
Chosen Solution Hi All, I hope someone can help with this query, I have replaced a HDD on two imacs same model EMC 2133, but both screen aren’t working anymore. Please see the image in the link below: https://d.pr/Vl1YnL Not my first time replacing HDD on imacs! So not quite sure what I damaged this time! Thanks in advance. The image looks a bit washed out it should be a solid grey screen with the blinking question mark in the folder....
Chosen Solution Hey guys have replaced the screen (whole unit with frame) on this Xiaomi Mi 9 afterwards the fingerprint Sensor did not work properly. It hardly Scans the initial fingerprint but won’t unlock the phone with it or allow any other fingerprint functions. I have already removed it and replaced it again. as it is embedded into the Display Unit I Wonder if this is a problem concerning the display unit or the fingerprint scanner itself....
Chosen Solution Did anyone tried to install a fullhd display into X240? The one it has is just an HD and mine has a a small defect. I wonder if its possible to use a physically fitting 30 pin eDP panel (I’m thinking about LP IPS). One of the local parts sellers said lenovo has a whitelist limitations in UEFI thus I need to buy the panel it supports. I had to do some research myself to figure out… made a video about that… https://www....
Chosen Solution One of my earbuds isnt suddenly working, so I decided to open both of them to switch their batteries. Turns out, the battery of one of the earbuds isnt working anymore. i want to replace it but the batteries available here in ifixit is only for the galaxy earbuds. i need the plus one. Anyone here knows where i can buy one? Hi, At 59 seconds into this video that battery type number for the Earbuds+ can be seen....
Chosen Solution Tried all known troubleshooting and nothing works. During night I Noticed that the display came on and off twice so I just shut down the phone. Next morning it would not come back on. Battery was fully charge when I shut it down. Even hooked it up into PC with USB and nothing. Computer can’t find it because it’s not coming on. Left plugged into PC and it feels warm so it’s on charge but that’s not the issue....
Chosen Solution I have a permanent red line going down the left hand side of my Vizio TV . It’s there even when the tv is on but the screen is black. Model M70-C3 Here is a photo. i have tried disconnecting and reconnecting the cables to the tc board and the pressing at the cables going to the screen by the line both did nothing to change the line. Pressing on the screen will make the line slightly fade for a split second or two but then the red line of pixels just comes back....
Chosen Solution The last few days, whenever I need to use the keyboard to text, I get a pop-up that says Keyboard crash fixed with a yes at the bottom. I thought maybe it was an update so I pressed yes. Then it says that my phone won’t allow for unauthorized apps and it sends me to settings. I have tried turning off my phone. I was able to send one text and then it would popup again....
Chosen Solution I have an Android Tv and want to use android features on it. Is it possible to install Apple ios into an android tv? Sorry it’s not that simple! Each hardware maker creates their product for a given OS which could be burnt into the devices firmware or be loaded via Flash storage (often called SSD). Each processor type or series requires a boot loader so it knows how to run the given OS....
Chosen Solution I have an original PS4 and I understand that the wifi isn’t the best. I was formerly able to have the console hardwired and would get speeds or 100mbps or faster. I am unable to hardwire now and via wifi get 30mbps sometimes, at best. Is there a way to upgrade the wifi on the console to support newer wifi connections? Such as 802.11ac? Would replacing the antenna help?...
Chosen Solution Message is: USB connecting Mass Storage and than card error. Yet SD card is correct and empty. Can somebody help me with this? Thx lease try changing the following settings on your camera. Change the camera’s USB Connect Settings: Go to [MENU] - [ Settings] - [ Main Settings] - [USB Connect Setting] - [Mass Storage] If the step above does not resolve the issue, change the camera’s LUN Setting: Go to [MENU] - [ Settings] - [ Main Settings] - [LUN Setting] - [Single] If that does work then replace usb cable Try connecting usb cable to a 2....
Chosen Solution When I plug my tablet in both with its own charger and my USB it says charging but when I try turning it on I get a yellow triangle with an exclamation point over the battery at first it was stuck on the start screen and would not g anywhere after rebooting it now it will not turn on even with charger plugged in @lgu97701 sounds like you either have a bad battery or a bad charging port/charger....
Chosen Solution I managed to find replacement lightning charging sockets for the Beats Pill Plus however after removing the existing charging socket I found 4 of the contacts covered with a Brownish Orange padding. I am attempting to fix the charging socket due to someone shoving a mini-USB cable into it and destroying all but one pin. On the back of the charging socket that connects to the board are 10 connectors 6 of which are clean and seem to mate with the boards connectors....
