Posts

Chosen Solution D-Ram Light on mother board when i turn it on. theirs nothing showing on monitors. motherboard; asus tuf z390 gaming pro gpu; amd radeon rx 580 ram; ADATA DDR4 32gb( 2 sticks) power supply; Seasonic cor gm-650, 650 w what iv tried; iv re-seated the ram like 5 to 6 times., iv tried 1 stick , iv tried re-seatin the gpu and cpu aswel. Hi @planetpatrick , If it is a new build just verifying that the ram modules are installed in the DIMM A2 and DIMM B2 slots?...

Chosen Solution Hi, I guess I overestimated my fixing skills and while changing the battery and cleaning my MacBook Pro Retina 15" number 11,3 mid 2014 (A1938) I damaged one pin of the display assembly connector, the part that is attached to the display cable and plugs into the logic board. Just one pin on the far left is gone, but the display does not switch on anymore. Everything else is fine and I can use my mac just fine with external displays....

Chosen Solution this phone has short circuit becose two side of diod near the battery connector linked to gnd i dont now what happend for it. number that show when test short circuit is 0.560v i remowe tow diod but did not change in this number. what can i do for it? dead divice and not power on my phone (G730-U10) dead divice and not power on. pleas what can I do?...

Chosen Solution How do I install Windows 10 on a Dell Inspiron 15 5578 2-in-1 when I have just replaced the hard drive with a blank one? I have a Windows 10 License, but can’t install it because all of the computers dell uses for examples are able to turn on. I cant turn my computer on past its diagnostic mode. Download the Windows 10 Media Creation Tool on a USB Flash Drive or direct on the hard drive you want to use....

Chosen Solution I’m trying to fix my wifes computer as it fell the other day and started saying it couldn’t read the hard drive. When I checked it out I realized the back cover is only held on with maybe 3 screws, and for a kicker the hard drive isn’t screwed in either. I pulled one screw and put it in a new spot which is working for now but I’d like to reconnect the rest of the back as well....

Chosen Solution I went to get my phone fixed in a random place in Manhattan; a couple of days later I just keep getting the service bar searching for service never working; I called my provider last night (straight talk) and it appears that I have a different imei than they have on file for me. Wtf?! Could they have change the motherboard? Why would they do that? And more importantly what do I do now?...

Chosen Solution I have an AT&t iPhone 5 that got damaged while someone else was trying to replace the battery. While trying to remove the battery they scratched what I think is a flex cable underneath the battery. Now the phone wont show anything on the screen. I also have a Verizon iPhone 5 that is stuck in a boot loop and has a bad IMEI. I was wondering if anyone knows if I can swap the logic boards for these phones....

Chosen Solution I am looking for replacement batteries for my Vive Pro controllers. Are they available here? Thanks Chris @chrisraven4321 sorry but it suer does not look like it. At least not on the website. Contact customer support and see what they come up with https://help.ifixit.com/collection/130-c… Otherwise you will have to do a comprehensive online search to get the batteries. Use the numbers on your batteries to look for them.

Chosen Solution My camera does not respond to turnin on. I replaced the battery but still no response. Just nothing. The battery may be in bad shape or you put the battery in the wrong way or you bought the wrong battery. If none of this works the problem exists within the camera

Chosen Solution The Intel website says the processor supports pcie 3.0 but not sure if it would be compatible on this motherboard. According to the photos the socket is compatible. It came with a sata m.2 but its in a m.2 m style socket Hi John, please visit Can I upgrade the SSD on the Tabpro S? , it may be useful for you :)

Chosen Solution I was having display issues, the screen was hanging on the white startup screen and then eventually over time went all black on startup, but the disks and fans were spinning so I took it to Apple and they kept it for a few days and then came back with a diagnosis of a failing video card, suggesting replacement. I declined given the price and took the unit home....

Chosen Solution After replacing the battery of course I broke the screen,so I just want to make sure my iPod will work before I order a new screen.I also get a message saying my ipod is in recovery mode so I rebooted,recovered,connected to itunes and it still gives me the recovery mode screen.So Im not entirely sure it was the battery swap because it was giving me the same message before the removal of the old battery,which by the way was still holding a 3....

Chosen Solution GoPro worked well but after not using it for a few months it doesn’t startup. Checked battery = charged Tried battery of a friend: same problem. Searched the internet and found information that this happens more often. Soft- or hardware problem? Does this sound familiar? Does anyone have a solution? Having a good background in electronics, I can only suggest this: 1- Make sure that the battery is in good condition and that it is fully charged....

Chosen Solution Then goes into cool down mode and clothes do not get dry. What could be the problem Solution 1: Lint Filter The lint filter might be clogged. Dryer sheets and fabric softener can leave a residue on the lint filter, reducing the air flow. If the lint filter is clogged, clean it. Solution 2: High Limit Thermostat The high-limit thermostat monitors the dryer temperature and shuts off the burner if the dryer overheats....

Chosen Solution My gas dryer is 10 years old, purchased in 2004. Last week it stopped working. The interior light turns on when I open the door, and it turns off when I close the door. In other words, the electricity is working fine. However, when I push the buttons on the control panel to start the dryer, the lights on the control panel do not turn on, and nothing happens....

Chosen Solution I mess it all up,now it says,iertutil.dll was not found.then my lab top is on but no start pic,just my pic screen is on,I can’t do nothing, but I’ve press F8 and am in some systems, then F2 is set up and F12 is boot systems I’ve try all those,is there a reset button?or how can I get into the dll to recover it,becuz I’ve disable it,I know.....

Chosen Solution I got a Xbox 360 from my friend with Red Ring of Death issue. I dismantled the xbox 360, cleaned every part Removed the heatsink paste, cleaned the processors with little alcohol. Applied new heatsink paste, assembled to he machine for testing. The fans does not spin after powering on (same red ring). I tested the fan connection with 12v adapter and they are spinning properly. Please help me in solving this....

Chosen Solution Hi I have a MacBook Pro (15-inch, 2019) and today when I turned it on, I am greeted by this nightmare. But as I tilted the lid, things got better. Could this be Flexgate at play? I am dreading taking it to AppleCare. Nope not the FlexGate issue! But just as bad. The Design Flaw Behind MacBook Pro’s “Stage Light” Effect. This is a FlexGate screen: Your system might still be covered under warranty as Apple had a run of bad displays (T-CON’s)....

Chosen Solution mt vtech vsp601a cannot register my last phone, i have 6 ok but last one says”fail base full”….. Hi, Are you trying to register a 7th handset to the base station or isn’t the 6th handset registering? Not sure what you mean. If you’re trying to register a 7th handset then according to the specifications you can only have up to 6 handsets connected to the base station.

Chosen Solution The cooling fan is draining the battery. I replaced the switch for the cooling fan. After the car is turned off it comes on and stays on for longer than 10 minutes any suggestions?? I changed the relay and thermal sensors on inlet and outlet but nothing changed and the fan kept running about the same length of time. There is a fan timer somewhere under the dash but I never bothered to change that....