Chosen Solution Hi Lost the charging cradle to my Vivoactive and need to charge. Anyone know which pins are the charging pins. With watch face down, pins on right are for charging. Top is Ground, Bottom is Positive.
Chosen Solution I have tried all the procedures indicated in most of the Forums and the computer does not turn on. The Magsafe light is not solid green. The problem might be in the proper logic board or in Magsafe DC in-board. In order to test whats is happening, you should disassembly the logic board. Before installing the motherboard back into the case and connecting anything, plug in the AC adapter into the MagSafe board....
Chosen Solution Hello - I have an Onkyo TX-NR535 AV receiver. I am moving from the US to Europe and want to purchase the appropriate conversion device so I can listen to my records on my Audio Technica AT-LP60. Can anyone quickly provide me with what I would need to purchase to appropriately convert the voltage and hz? @mei7f the safest way would be to purchase a 220V to 110V step down transformer that you then use to supply the proper power for your receiver....
Chosen Solution Im testing an iphone 5s along with a 5c. After hooking the DCPS to the phone via battery terminal on the logic board, and i get the voltage i set it to on vcc main 3.9v. Why dont i see any amperage draw from the board? This is hooking up the logic board only… when i hook up the logic board through the charge port i get 0.7 ma draw....
Chosen Solution I fell my phone in the floor then it become very hot then switch off died I try to switch it on , recharge it No way What and where the damage happend? Can the battery damage from one fall? For your advice Going on with what “Ben” said it is most likely the power controller chip and it is very hard to replace and it may have damaged other items in the phone as well so… Time for a new one…....
Chosen Solution My gamecube is having issues playing one specific game. It will play far enough along to get to the memory screen to create a new memory file but stops spinning. It always stops there and the game itself is in pretty good condition with barely any scratches. Not even my wii gets past that point. Is there anything I can do to fix this? (Note, my gamecube plays other games perfectly fine, it’s just that one game in particular I’m having trouble with....
Chosen Solution A couple of weeks ago, I noticed my ps4 optical disk drive doesn’t work. I ordered a new one, that came with a new daughterboard but it wasen’t in the same number as my old one. I replaced the optical disk drive. I didn’t know that I was supposed to use my old daughterboard, and I gave it to one of my kids and he accidentally broke it. so I ordered a new one with the same number as my old one- BDP020 I replaced the daughterboard that came with the disk drive with the new one that I just ordered, and it still doese’t working....
Chosen Solution This is a Mac SE/30 which once worked but has bee in a loft/attic and the screen is very distorted although you can make out enough to see that it otherwise works. Obligatory CRT safety warning: CRT monitors can hold 15-25k volts (15k is the average for desktop class CRTs, 25k for TVs). If you repair it, DO NOT TRUST THE BLEEDER RESISTOR! Discharge it yourself! Refer to this previous Answers post for safety info....
Chosen Solution It appears the display section of my MacBook Air had been disconnected from the bottom panel. It is hanging on merely by the wires. How do I repair this? Replace the entire top half.
Chosen Solution I accidentally let my 2ds fall from my hands and now it seems to have its screen cracked, lower and upper screen, but i can’t tell if it’s the LCD or just the outer glass. There are no visible black spots, and the cracks don’t reach the surface. I can still use it perfectly, except for when i press the home button or shake it a little bit, it causes the lower screen to show weird colors around the cracks....
Chosen Solution I need a new WiFi card for my Xbox one and I can’t find any so I just wanted to see if a Xbox one s WiFi card would work for it or I found them but they are out of stock or just the shipping takes a long time to get here. No, it just won’t fit.
Chosen Solution I’m looking to turn my 2020 imac 27" into a standalone monitor and have found the following panels exist and would like to know how to identify which panel these have: LM270QQ1-SDA1 LM270QQ1-SDA2 LM270QQ1-SDA3 LM270QQ1-SDB1 LM270QQ1-SDC1 LM270QQ1-SDD1 While I can’t say for certain as I haven’t looked on the few I’ve worked on, this systems display is listed as Apple P/N 661-16088 which is listed as a LM270QQ1(SD)(F1) display....
Chosen Solution my beko wfe7247w washing machine is going through full cycle but the drum not moving. belt fine is the motor pulley spinning? if yes check the tension on the adjuster. if not take a volt meter and check power at the motor. if power is there replace motor. if no power there is a fusible link that supplies power. check for power before link. if power is there replace fusible link....
Chosen Solution model no-om 20 acf microwave frequency- 2450 mhz microwave output-800watt Any burnt smell or symptoms before this happened? any unusual activity? do note that working inside microwave oven, involves with high voltages, if unsure, consult someone who know about this. what had you checked? switches? some idea btw https://www.sos-parts.com/microwave-trip…
Chosen Solution powers off after changing channels several times back to back then cuts itself back on within 5-7 minutes to do this all over again. Update (07/28/2018) oldturkey03, attached is a pic of the iR board from the bottom of the TV. Very little on it! the ir sensor, a resistor and a LED to indicate “on” or “standby” (red or blue). Let me know what you think! Thanks....
Chosen Solution error code 2000-0111 will not boot Hi, The info in this link may be of interest to you. I suggest that your look at all 5 pages to see if there is anything in there that may be of some help to you. http://en.community.dell.com/support-for… Straight from the Dell website it is a BIOS update that needs attention http://www.dell.com/support/article/us/e…
Chosen Solution I bought a wii console, it is not able to connect to the internet, it is not able to find any access point. The console is wii white, old version, it was able to read some cheep game discs I bought from stores, I tried to burn wii and gamecube games on dvd discs, the wii failed to read them, I used the usb loader and the back up loader and neogamma, all of them failed....
Chosen Solution Hello, my works phone was restored back to factory settings. When it was turned on to use it was on the hello screen but asked for a password. I put in the pass that was originally on but it failed then went to iPhone unavailable. I put it into recovery mode and onto itunes but it keeps going back to iPhone unavailable. Can someone pls help When you connect it to iTunes in recovery mode, are you processing a restore?...
Chosen Solution My fairphone 1 fell on the floor. It’s a little broken on the top of the screen but Still working for the moment ! Can i order e new screen ans fix il myself ? Merci The Fairphone 1/FP1U Displayeinheit is not available since six month! It´s a pity! So I never will buy a fairphone again!
Chosen Solution Hi everyone! As i wrote in the title, i swapped the mobo of my mid 2010 2.26GHz Macbook Unibody with a 2.4GHz one, but the original fan ran 100%. I bought also a new fan, but the result was the same. I performed a clean install of MacOS, PRAM and NVRAM reset, and at last i restored a previous MacOS backup, but all these steps gave me the same result: fan spinning at 100%....
