Chosen Solution Can a cracked screen be replace on a microsoft surface laptop? Yes, your computer has concern. Yes. You just need to find the make-up for the exchange. please tell me the exact model of your machine.
Chosen Solution My iPhone 5 got stuck in my bed sheets and .went right in the washing machine..! I used a bag of rice and after 24 hours, the phone was recognised by iTunes. But the day after, it stopped being recognised. Does the fact that it was recognised at first mean that the phone is still recoverable? Is that corrosion that formed on the motherboard? I removed the EMI shield and use Isopropanol 99....
Chosen Solution A computer USB port is powered. So you can send commands to the phone while it is being charged. If you can still get into TWRP (I am assuming that is what you use for a recovery), you can send ADB commands to to the phone. If that is the case, put a MicroSD into the phone, and send ADB commands to copy your data from internal storage to external storage....
Chosen Solution The screen on my 1st generation MacBook Pro has a brown color on it. It goes all along the entire 4 edges, and is about 1" wide (it resembles a water stain on a sheet of paper). Does this have any known cause? How can it be fixed? WEIRD! Do you have an external display available? If so, use the adapter that came with the machine to connect. Does the brown border show up on the external monitor?...
Chosen Solution iMac 21.5 late 2012 slim type model A1418 Hi guys I am completely new to this forum and hopeful to find answer with what’s going on with my imac, the story begins….. I recently try to upgrade my iMac ram following the instructions here, I tried installing new ram and was working fine, then I tried add additional ram and was working fine as well, the third time I tried to lift the LCD I forget about the lvds cable and unintentionally pull it, I did not worry at that time, so then when I insert the lvds and tried to turn on my iMac I can hear boot chime but without display, I tried with external display and as expected there is display showing, I carefully inspect the lvds cable and found out that some contacts are broken (not visible because it’s tiny) so what I did next is order similar cable and as I received the cable with no luck still without display not even LCD lights, I was desperate and look for I fix branch here in philippines and I told them the whole story, and they said that it could be the LCD display, and if I already did the troubleshooting it’s no sense that they will repeat the same procedures and pay them for nothing, so I order new LCD panel, exactly the same model, and couple of lvds cables just in case, as I received the display LCD I replaced and with new lvds as well, but still without any luck, looking for some advice guys maybe you could recommend much deeper troubleshootings to fix my machine, maybe some fuses imbedded on the logic board for display, but I do not know where to find such fuses I am not familiar with this tiny electronics but I know basic troubleshooting with multimeter, I would really appreciate if somebody could give me a guide how to locate suspected fuses, also LEDs light are working except for the no....
Chosen Solution I want to replace the RAM in my laptop. I’m wondering if I need to purchase both the anti-static strap and mat or if I can just get the strap and connect it to a ground source (like the screw of my wall outlet). Thanks in advance for any help! Adam A a simple anti-static strap will work for this. Even if you do not use it, make sure that you discharge yourself first (touch some grounded metal) and don’t work on carpet floor or wear garments that increase the potential for static to build up....
Chosen Solution For the Samsung Galaxy Tab S 8.4", model #sm-t700, does the charging port connector plug on to the main board or is it soldered? Danny, It appears that it does not, ifixit Instructions Hope this helps. Abbot
Chosen Solution When printing double sided on pre printed paper it will print 1 page double sided perfectly. When printing 2 or more double sided pages the printer flips the pre printed page and prints the first page on the blank side. This is happening on all 4 of the computers that the printer is installed on. This was not an issue with our old brother printers. I have tried:...
Chosen Solution I have a slightly aged Indesit dishwasher. I ran a program a while back, it completed the rinse cycle, but did not drain and therefore finish the cycle. Syphoned out the water cleaned out some muck and ran a dishwasher cleaner, without dishes. Ran two full cycles and everything seemed friendly Have just run a cycle with dishes ones again and we are back to square one. Any help greatly appreciated!...
Chosen Solution I have a Troy-Bilt model 34322, older one, and just love it. The gears on the drive wheels are wore out and I found out the wheels have been discontinued. Is there any other ones that will work? See if they are MTD 734-04018C 8" Internal Gear Drive Wheel. If so they are available here: https://www.amazon.com/Genuine-MTD-734-0…
Chosen Solution I have a briggs and Stratton 23 ohv engine on a john deere zero turn 425 mower. It ran perfectly last week. went to start it this week to mow and now it sputters, black smoke and backfires all when trying to give it gas. it will not run fast nor can I engage the blades as the load makes it do the same thing and cut off. I changed the plugs, cleaned the carb, checked the valves, the blades move freely....
Chosen Solution Hi! So my aunt got a new iPad Mini 4 to replace her old iPad 4th gen. She told me if I could fix her old iPad she’d think about handing it down to me (glad iOS 10 will support it haha). She took it to the Apple Store and they said it would be a $300 fix due to a hardware issue. But I am certain that it’s a software problem....
Chosen Solution F70 error code. Runs but won’t light burner. Here’s the previous answer given on this dryer error code: Dryer won’t start Error Code F70 The F70 error code indicates a loss of communication between the console panel and machine (main) control board. Disconnect the dryer cord from the power supply and remove the top panel and check for loose connections on each control board. I’ve added the instructions in the image below....
Chosen Solution Even when my flash is closed the flash still fires, the only way I can take a photo without flash is on the no flash setting. also my camera is a nikon d5500 but it wasnt an option. exactly the same thing has happened to me with exactly the same camera. It happened after I dropped it :/
Chosen Solution I’m attempting to figure this one out. The Fn, Command, 4, t, g, and keys stopped working. Tried all the “non-invasive” software, System Prefs, SMC reset suggestions, then replaced the keyboard with a brand new keyboard and these keys still do not work. Started up from an external drive, opened Terminal and tested keys and they did not work here either. Any further suggestions out there beside a logic board replacement?...
Chosen Solution galaxy s2 shows battery with yellow triangle. I have it charging right now. I changed the battery once but a few days later it shows the same thing. Can the replacement battery be bad as well or it a different issue? Try a new battery if you still have the problem it’s the charging port on the phone an you will need a new1 soldered in
Chosen Solution 2011 GE microwave will sometimes lose power after use. If I unplug the power and plug back in, it will usually come back on. But sometimes even when it regains power, the control panel buttons won’t work unless the door is open. After resetting the time, it works fine for a while. I have already replaced both thermal fuses and the control panel. Also, no matter if the microwave is working or not working, if you slam the door, the surface light bulbs will flash....
Chosen Solution ZTE ZMax Pro z981 When I reboot my phone I will continuously get a message on my screen saying “Unfortunately Stock Android has stopped working”. I have looked everywhere and spent a couple hours on the net looking for responses on how to fix this with no response… I also cannot get my phone to update using system update.. Any idea on how to fix this would be greatly appreciated....
Chosen Solution Hello, i have some problem with my whatsapp.. i cant hear any voice from the video that i record at the status, checked all the setting but everything at permission is turn on.. when i try recording using the camera app, i can hear the voice… im not sure this problem come from the app or my mic problem Try deleting the app and installing it again, double check settings as it might be a software fault or possibly a hardware fault
Chosen Solution my iphone cant recover on i tunes gives error 21 I had a similar problem. I got an error 9 when updating to iOS 11 using iTunes. I updated my itunes, checked my usb cable and also tried another computer, but still the same problem. Finally I bypass the error and restored my iPhone with imyfone ios system recovery. It was recommended by my friend and it is really easy to use....
