Chosen Solution Hey I accidentally dropped my 3ds while playing a different game and now it wont turn on I press the power button and then the light turns on for a couple seconds then it turns off can somebody please tell what happened to it and how do I fix it please Have you tried opening it up? It’s pretty likely that a part inside has been disconnected or broken....
Chosen Solution One of the charging ports on my charging station is no longer working. I think one of the metal contacts that is supposed to spring up is trapped in the plastic housing. Does anyone know how to open this thing so I can try and re-seat it? Thanks! Take DualSense charger and front facing you, turn over so the bottom is up. Locate seam where plastic meets plastic and use wedge to open and pop the plastic internal clips....
Chosen Solution Hi,I ordered a new LCD and touchscreen on aliexpress and went to the local store to replace it,now the screen is working but the fingerprint won’t work,it always say:“Make sure that the Home key is clean and dry, then try again” but the button is clean and dry.I tried to restart it but nothing. At the local shop they said that they could reinstall the system for some money,my question is, can I reinstall it by myself and how or does someone have the same issue and a working solution?...
Chosen Solution My tablet has, for a while now, been flashing the boot “Samsung galaxy tab a” screen even while holding the power and volume up buttons. I have opened it up and have cleaned it and made sure everything was good. It will even kick me out of the boot loader if I do somehow manage to get to it. I don’t know what to do. Have you tried booting your tablet into Safe Mode and performing a reset?...
Chosen Solution About a week ago I replaced an iPhone X screen. Everything was working fine after the replacement. Two days later the screen started to glitch and just go black for a split second and go about life… The problem is still there and I’m not sure why. Can it be the screen is faulty maybe??? Where did you get the screen, the touch panels on the copy oled, HO3 and LCD versions of the iphone X are the cheaper kind (you can see the easy digitizer in sunlight) are not very good....
Chosen Solution I replaced my old HDD with an new 500 GB SSD and used Carbon Copy Cloner to put everything on my new SSD and then put it in my MacBook. It worked perfectly and I’ve been using my system with the new SSD for 2 months now. I want to now install the macOS Mojave Update on the SSD. It says it’s not the right GUID partition and it says I have to format my SSD again which I refuse to do....
Chosen Solution How much is it going to cost to fix the screen of BT 5000? Not sure the Model, but BT Baby Monitors have a 24 month warrantee, so if it’s a fault then check out the helpdesk if it’s a BT VBM 5000, see http://bt.custhelp.com/app/answers/detai…
Chosen Solution When I boil water in the kettle, it comes out smelling and tasting like chemicals. Is this bad? Is there any way to get rid of it? Does it go away over time? The chemical taste and smell is a common byproduct of the kettle due to the manufacturing process. However, there is a simple way to take care of your problem. To remove the chemical smell and taste, boil vinegar mixed with water in the kettle....
Chosen Solution Water went inside my phone and after drying it for almost 2 days, everything is working except charging port and headphone port. I am not able to charge my phone and neither I am able to connect a headphone. What should I do to fix it? You can look to upgrade device firmware, if it did not work, then you have to go to a repair shop, some of the components may be burned out because of the water....
Chosen Solution Good evening you all. I bought an used iMac 5k 27” 2017 and when I booted it up I noticed a vertical line of cyan pixels. At first it was appearing occasionally but then, as I touched the screen near the line, it became kind of permanent.I read online (especially in this forum) that it probably is a TAB ERROR in which a ribbon connector or something similar is damaged, probably due to a screen opening attempt....
Chosen Solution Hi there guys, I bought some used MacBook pro’s today, for parts, and I managed to have one working one. But I have a screen and some other stuff left, which could make up a second working one. The only problem is, the screen has some cut wires on the left side and I don’t know their purpose. Are they needed? Could I just leave them disconnected? If I can’t leave them disconnected, where should I put them?...
Chosen Solution While removing the touchscreen/digitizer assembly from an iPad Mini, I noticed that several horseshoe shaped copper contacts in the male side (attached to the mother board)came out. I have done 30 or 40 Minis and this has never happened. Has anyone had this experience? If so, how do I fix it? I didn’t have personal experience breaking it but I have fixed someone’s pins that broke it. At the time I didn’t have the part in stock so I took a copper wire and shaped it in and soldered it on....
Chosen Solution I was intermittently getting a red cross over the battery icon coupled with a “MTP initialization” message when I would plug in the power cable to the device. Im now getting this all the time preventing me from charging the unit. I have no idea whats going on with it. Am dreading having to take it somewhere and how much that may cost me. Any help would be greatly appreciated!...
Chosen Solution Hi everyone. Although my research inside other similar issues, I couldn’t find an specific case like mine. So, I’ve changed the display of an Iphone 5S and after all process be done switched on the device and so far couldn’t get out of the appple from very first screen. This apple remains full time show the device is stacked. Tried to reset the device following a clue given by another member - Nellyson112 - but regretfully didin’t work....
Chosen Solution My S8 has a few cracks and I like to have it fix. I went to the store and they told me that since I have burnt marks on the screen, they have to replace the LCD + glass. Is that true? Or can I just replace the glass? Thanks, Technically the glass only is replaceable. But the shop you go to may not do glass only repairs for liability reasons....
Chosen Solution Droped. While the cord was still attached and willnot charge I have used other chargers that work with the tablet but it willnot charge Did it land on the charger port itself? Rip out of the jack upon falling? If this is the case then you will need to have a look at a guide on how to open it up and replace the charging port. Depending on your device this may just be a part replacement or an actual solder job requiring soldering skills and a new USB port from ebay....
Chosen Solution my dsi’s top lcd was inverted, so I was going to do a replacement. i took it apart, but wanted to make sure it still worked, so I turned it on, still half apart. turns out it was a loose cable, so it was fixed! I had to mess aroung with one of the other cables while fully assembling, and got it together and- nope. dead. tried everything. got any ideas?...
Chosen Solution Hello @mayer I have a Mac Pro 5,1 (mid 2010) and I have months this problem with the fan’s spinning all the way to the max sounding really loud and annoying after a while. I saw your screenshot from your fan speed’s and compared it with mine. I checked inside my Mac Pro and every fan inside is spinning at high speed, but the fans that control my: Intake, Exhaust and PS are at 0?...
Chosen Solution I was cleaning my Macbook pro when some water got to the display cable area. It powers on but there are faint gray lines on the bottom right corner. I checked the inside, and there was some black on the metal for the display connected and its port. Does anyone know if the logic board, display, or display cable is the issue and how much it would cost to fix?...
Chosen Solution I got an iphone 5s that the seller said randomly shut off annd would not power on about two weeks ago. The phone does not charge. The battery reads 2.5 volts. I am getting ready to use my multimeter to test Bat VCC, VCC MAIN and 5V0 USB in ohms/diode mode for shorts. If I find a short why cant i just hook up the DCPS to the battery terminal and use freeze spray?...
