Posts

Chosen Solution I recently got a broken XB1 from an uncle after a power surge fried his. The Xbox’s power brick works and the front light turns on and chimes when pressed, however, there is no signal to TV, regardless of HDMI connection or TV channel. I have already tried all of the general troubleshooting, turning off the power brick entirely and waiting, turning off the console and waiting, holding the button for a cold reset....

Chosen Solution Good evening everyone, I was looking for a remedy to try to save a trackpad that shows signs of malfunction, delays, difficult clicks, autonomous movements etc … I found this video on youtube, which tries to solve the problem with a cleanup: https://www.youtube.com/watch?v=awihkz3a… my trackpad, however, is a different model, exactly this: https://beetstech.com/product/trackpad-5… I am therefore afraid that immersion in alcohol may damage some component or plastic connectors on the small circuit board....

Chosen Solution Replaced all micro switches , had starter checked at shop it’s good , I am getting full battery voltage at the starter white wire , 9.2 volts at yellow wire but starter will not turn over Hi It does sound like a battery Issue Have checked the voltage when you turn it over? it should give a constant voltage reading to the starter. the solenoid could be stuck ....

Chosen Solution Shows two bars that look like batteries Want to know how to fix my tablet so I can use it. Haven’t been able to get it open in over two weeks. Want my tablrt fixed so I CAN USE IT.

Chosen Solution So i was wondering if it is possible to completely remove the Lightning port on an iPhone for Security reasons. I would then charge it via QI. But you would probably need some dummy Part to put in there. Currently, the Lightning port is used for charging, compatible wired earphones, and for recovery/DFU mode via Mac or PC. For charging: We can use a wireless charger (though currently, it is not efficient....

Chosen Solution It relates to any models of all brands of mobile phones. What are the ways to confirm display not working(except by replacing a good one) by checking with the multimeter? @kumaran123 … if you dont have the ability to test with a known good, only other option is to have the schematic and test using your multimeter. other than that experience will sometimes help rule out other possibilities, but nothing concrete like replacing suspected part with known good or having schematic to check values with multimeter....

Chosen Solution One day I noticed my controller would occasionally stop getting tracked by the base station and my hand gets stuck in the air in game. Steam Vr said it was still connected. So I looked some things up and opened it up and unplugged and re-plugged in stuff, I’m pretty sure I put everything back but still had the same result in it being connected but not tracked. It’s been awhile since I last tried fixing it but now been around longer so maybe there’s a new fix out there....

Chosen Solution The sound cuts out on my Crate GFX 212t but returns with pressure on any control knob or bumping the amp. I’m thinking loose solder joint but not sure where to start. It sounds like a bad solder joint or a loose connector. If you are comfortable removing the amp from the case, first look for any lose connectors (AC unplugged). If none are found then plug in the amp into AC and use a plastic handle of a screw driver (or other plastic device) to tap around the circuit board....

Chosen Solution I recently replaced the screen on my phone and placed the cable cover screws in the wrong holes, damaging the logic board. Now the phone will not boot and I get the blue screen. Currently the are no logic boards in stock and I need the phone for work ASAP. Would I be able to purchase a “bare” board and swap all the components over or is this beyond a layman’s repair ability....

Chosen Solution So i forgot my passcode for my iPad and now its deactivated. It says “connect to iTunes". Usually, when it in DFU mode there sould be an usb cable and the iTunes logo on the screen and iTunes should say that there’s a Problem with the device. But on my Display there’s the Usb Cable and a laptop logo, and when i put it in DFU while iTunes is opened, the “Your device has a problem…” message wont pop up....

Chosen Solution Bios had a password lock on it when my teacher gave to me was able to do every else to fix it except remove the bios admin password on this d 830 remove the cmos jumper wait 10 seconds and then return it should work Update remove the cmos jumper from the mother board wait 10 seconds and then return it should work. Also can disconnect the cmos battery wait 10 seconds and the reconnect that should do it also....

Chosen Solution how Do I back up my surface studio before changing the hard drive It is a “best” practice to back up data before doing any upgrades or repair. Most of the time nothing goes wrong and the data is intact. But, sometimes things go wrong and the data gets partially or completely wiped out and having a back up makes recovery easier. You should, at a minimum, back up important files and pictures that are not replaceable....

Chosen Solution Why does my notebook turn on but does not turn on the screen? Maria Julia Blackhall attach an external monitor and let us know what that shows. If that is okay you know it is an error with your LCD. If it is not then you may have issues with either your motherboard or your firmware.

Chosen Solution Got it used and clogged with what I assume was drywall caulk. I took it apart and detailed it. but now after reassembly I get severe and excessive vibration in the unit and can’t even use it above same level 5/10 and that is really uncomfortable. The bearings are good as they don’t appear to have any wobble or grinding when in my hand. this is only happening at higher speeds as well....

Chosen Solution Hi, I have this problem for over a month… my laptop randomly starts Windows Media Player after like 1 minute I open it and my fan starts to make this loud noise like an airplane… Thats not the only problem, I also got low fps in games, at least League of Legends, it drops to 20 fps.. I didn’t do anything.. from one day it just started acting like this for no reason… I opened it, it’s nothing related to hardware....

Chosen Solution I actually have a Nikon D60 whose autofocus is no longer working. Any easy fix for that? To fix: hold on to the very end of your lens and the camera base. Give the lens a little twist - you will feel it unlock. DO NOT twist it hard. It will release. After I release my lenses, auto focus seems to work as it should. I hope this works for others....

Chosen Solution Make sure about that you have properly registered and setup the Fire TV Stick device. If you are unable to find any solutions, then you can looking here for troubleshooting fire tv and perform or follow step by step procedure to continue your device.

Chosen Solution Hello I front camera got fogged is there any tip for my to remove this? Best way to solve this problem is to put the phone in a Ziplock Freezer bag with some of the little silica packs that you find in shoes, backpacks, purses, etc. Get as many as you can and leave the phone in there as long as you possibly can. I would recommend at least 2 days....

Chosen Solution We have a GE Profile refrigerator model #PSHS6TGXCSS. It was unplugged and moved to another plug temporarily due to some work we had happening in the house. When we opened the fridge we noticed the compressor isn’t running, it’s not cooling, the front display panel is not working, but the lights are on inside. We tried to reset it by unplugging and moving it back to its original outlet, but nothing changes- it is still not working....

Chosen Solution Hello. I have a Huawei Honor Pad 2 and I have a ghost/fake clicks problem. Whenever I’m using it and I press somewhere on the screen it clicks somewhere else opening apps that I didn’t want to open or doing something I didn’t want it to. I haven’t tried resetting it because I believe the digitizer is broken since I dropped it a few times. Now to the real problem: I been looking on internet for quite a while but I literally couldn’t find anything about repairing this tablet, no website is selling its digitizer and there are no teardowns and such, so I have no idea what to do....