Chosen Solution
Not sure what driver is required for all screws I have got #000,#00,#0 and #1 Phillips driver however not all fit.
You will need a Pentalope screw driver it’s like a torque driver just a bit different you will get one in the kit if you buy the kit with the tools. There are only 2 Pentalope screws they hold the front screen to the housing. You will need a suction cup and a hair dryer or an adjustable heat gun or s small sock with rice in it. The glue on the front housing will loosen easier when it is heated but don’t heat it too much you can mess some things up by over heating your screen.
