Chosen Solution
I have Samsung RF260BEAESR/AA-05 fridge/freezer. the led display shows -2 (for freezer) and 37 (for fridge) degrees….but freezer isn’t that cold to keep everything frozen (ice tray not fully frozen, ice cream are soft, etc). this whole issue happened after we had the power outage few weeks ago…and i have reset it few times, same results….even i had replaced the evap motor fan in freezer…same result. There is no error code at all since we got it. So what should i do next?? (I had thought of replacing the temperature sensor(?) that is located in the ceiling of the freezer, but it is not serviceable by any standard, but I had seen somewhere where you could buy other sensor and cut/splice the old one out and put new one in, etc…or is it the circuit board, eh??) The fridge is almost 2 years old…
Hi, Here’s the service manual for the refrigerator. Go to p.47 to view how to get into the diagnostic test mode so that all the functions can be checked. There are also troubleshooting flowcharts that will help as well, depending on the error code that may be displayed by the diagnostic tests. It also has the specifications for the temp sensor (see p.58), so that you can check if it has the correct resistance at the specified temp and where this can be checked (see p.64 for freezer sensor). Hopefully this is of some help.
