Chosen Solution
I have the Maytag Bravos quite series 300 washing machine. I took out the tub part, clean everything out, then I replace the drain Pump. Now it will Drain. But now it fills with water, then it sounds like its revving up for a few seconds, then starts draining water [all the water does drawing out] (time left for the washer goes to 5 minutes). Then shut-off. It missing the agitation part, rinse part The model # MVWB450WQ1 SER - C02070905 Type - 580 What do I need to do. To fix it?
After the water fills, a circulation pump is supposed to engage. Given the circulation pump is near the drain pump you replaced, I would double check to make sure you didn’t knock a connection loose to the circulation pump. Also, I’m not sure of the type of connectors for the two pumps, but if they are the same connector, I would also double check that you didn’t transpose them. Also, people who had similar problems found the wig-wag solenoid to be the problem. You can find an overview of the system here: Wikipedia I hope this helps.
