Chosen Solution
Im testing an iphone 5s along with a 5c. After hooking the DCPS to the phone via battery terminal on the logic board, and i get the voltage i set it to on vcc main 3.9v. Why dont i see any amperage draw from the board? This is hooking up the logic board only… when i hook up the logic board through the charge port i get 0.7 ma draw.
“After hooking the DCPS to the phone via battery terminal on the logic board, and i get the voltage i set it to on vcc main 3.9v. Why dont i see any amperage draw from the board? “ That ia a normal reading When you turn on the phone then you see the current has it boots up
