Chosen Solution
Hello My cinema display started smelling weird and then shut down. I opened it and found the problem to be a burned spot on the logic board. No problem I’ll just replace the logic board and then I can use it again. So I was browsing for a new board when I saw a dutch thread with someones logic board also burned. But the weird thing is that the burn is at the exact same place.
Does anyone have had a problem with a burned board?
Lukas Guy, that looks like the LED driver. It is most likely a “common” failure if you have a short within the backlight circuitry. Any short there would take out that driver. I would suspect the primary offender would be the LCD connector.
